Alti

Hi, its ready to join the PUBLIC BETA BRUNCH?

Hello, see this Bug in RSSLO Tirol-Route.

Thank you!

sometimes i hold with an passenger train in my station, press "T" (the station is in the destination list! ) and while the passengers are loading/unloading,
this sound comes in: "the train is stopped... please not to try open doors..." 
hope you can correct this.
 

thank you!

1. i would like to select Scenarios without to select a Route or Engine before.
so i hope to enter "GE-6-" in an scenario search mask, and the all scenarios with this names "*GE-6*" comes in the result list.
or enter "Vienna" into an scenario search mask, and all scenarios which have stations with "Vienna" comes into the result list.
or  enter "Railjet" into search mask, and all scenarios which have the train "railjet" comes into result list.
 

2. I would like to have the RWC2 ambient sounds in an "free-roam" scenario:
    Take Route and start-Point, select your train and use RWC2 in free roam also, (not for destinations also not or PIS-Sounds in train),
    so for the good ambient sounds while drive, and to use the Huds: Track monitor, speedometer, limit widget and also compass.
 

3. eventually its possible to see the track gradient in the track monitor in a easy way like an small arrow points up- or downwards
     to right of the locomotive in the track-monitor window.
    

a lot of work is waiting for you...

Thank You!

Hello, is there a way to set own option- flags to tun TSC when start with RWE2?

When i set the options here in Steam (see pic), will they considered at startup with RWE2?
or make RWE2 only the own flags possible?

Hi, i got it to work again in Window-Mode.

so i found out that the max setting for window-mode that working is

<ScreenResY d:type="sInt32">1024</ScreenResY>

when try higher, so maybe 1050 or 1080 the TSC will not work.
my RWE2 works again.

BUT:

WHY MY RWE works only when TSC in Window-mode?
Why it work not in Fullscreen?

Hi, there was a small download on STEAM now für TSC. Window-mode is available again now.

BUT: ONLY in 1024x768
So when i set an other resolution Window-mode is broken. [BUG-Report to DTG sent]

you can not solve this.

RWE2 calculate distance in a direct line between your position to the arrival point,
and not on the railway distance, like TSC it did.

Hi,

my RWE was setup for Windowsmode before TSC Update.
Now Window-mode did no longer work for me (Bug-Report sent to DTG)
I am no in Fullscreen Mode.
I run RWE2, setup my Scenario, click to "drive Now".

TSC run in new 64Bit Mode, Monitor switch to fullscreen, i go to my scenario,
but RWE2 did not work for me. No Menus, no ambient sounds; 

RWE2 Settings to Fullscreen, Vulkan is on or off, make no difference.
I am NOT using DX12 mode.

how to repair this? thanks, alti.

When edit the shaders in settings, then the App will cook new all content.
then i will begin a drive. after setup new scenario, and will start this, the app crash.
so this always after editing shaders. so i have to close and restart the app whrn playing trainsim after edit the shaders.

crashreport:

Name der fehlerhaften Anwendung: RWEnhancer2.exe, Version: 0.8.10.0, Zeitstempel: 0x64185b80
Name des fehlerhaften Moduls: RWEnhancer2.exe, Version: 0.8.10.0, Zeitstempel: 0x64185b80
Ausnahmecode: 0xc0000005
Fehleroffset: 0x0000000000014fbb
ID des fehlerhaften Prozesses: 0x5934
 

Fehlerbucket , Typ 0
Ereignisname: APPCRASH
Antwort: Nicht verfügbar
CAB-Datei-ID: 0

Problemsignatur:
P1: RWEnhancer2.exe
P2: 0.8.10.0
P3: 64185b80
P4: RWEnhancer2.exe
P5: 0.8.10.0
P6: 64185b80
P7: c0000005
P8: 0000000000014fbb
P9: 
P10: 

Fehlerbucket , Typ 0
Ereignisname: APPCRASH
Antwort: Nicht verfügbar
CAB-Datei-ID: 0

Problemsignatur:
P1: RailWorks64.exe
P2: 0.0.0.0
P3: 6260049d
P4: GameManagerVC64.dll
P5: 3.0.0.1
P6: 62600489
P7: c0000005
P8: 0000000000d91682
P9: 
P10: 

Fehlerbucket , Typ 0
Ereignisname: APPCRASH
Antwort: Nicht verfügbar
CAB-Datei-ID: 0

Problemsignatur:
P1: RailWorks64.exe
P2: 0.0.0.0
P3: 6260049d
P4: GameManagerVC64.dll
P5: 3.0.0.1
P6: 62600489
P7: c0000005
P8: 0000000000d91682
P9: 
P10: 

Hello,

RWE2 becomes more and more perfect.
in Autumn now in Europe we will see more rainy weather.
RWE2 depicts perfect this weather conditions.
But i am missing the rain Sound, when moderate rain hits the windshield.
so i hope its possible to get an harder sound for this.
Thanks, Regards from Austria
Thomas

Thank you!

Hello!
Is there a chance when RWE2 find an software update,
that in this case stop the "auto cooking". 

because i have to wait for cookung, then run the Updater, then cooking again.
Thank You, Alti

Request, if possible for implementation:
In a quickdrive weather change while driving on longer routes.
Example Tauern Tunnel, sun on the south side, rain on the north portal.
Or just rain sometimes, then again no rain. After all, it does not always rain in every place.
Or from Sunny day into a Thunderstorm. Why not?
When such can be possible, then i will put this on the Wishlist.

Thank You, Alt.

Hello!

I would have there still another desire. When you drive a passenger train, (Quickdrive) comes at each station the platform announcement: "Attention to track first, track second, track third, etc.... "

This is, of course, completely wrong German. Correct would be: "Attention on track one, track two, track three," etc....
I think this is due to the script, which is the basis of the voice output. It will say "Achtung auf Gleis eins." and the voice output misinterprets this point, not as the end of a sentence, but as the first, or second,...

It would be great if this could be fixed. Thanks, Alti.

Translated with http://www.DeepL.com/Translator (free version)

Hi again. 
i have in the menu for the cooker pressed to "Reset".
since then this error no longer visible.

Hello, startup the latest app, 0.7.19.1

goto Quickdrive, select like in picture:
Engine Type is filter to "Diesel" only
Maximilliansbahn, Freight Train with ÖBB2016

i get in Quickdrive this one:

a "JustTrain Loco" on Munich-Augsburg

so i close TS, click in Enhancer to the red "Cancel" and try it again, became this one:

Electrical 1044 on munich-Augsburg

so close Enhancer2, trying again; runnig as Administrator,
chosing Maximilliansbahn, Loco filter to Diesel again, my choice is now Aerosoft DB BR628
it works now. Quickdrive give me into the Route with selected Loco.

thanks, its a great feature

thanks

Hi, 
everyone i start the app new, it opens in maximize window mode.
also when close MSTS, after playing and click on end a scenario, the program window is alway automatic maximiced.
It would be great if the program could keep the last used setting and not always automatically maximize the program window.
this behavior of the program bothers me extremely straight because I have an Ultrawide monitor.
and it's terrible when the program always looks like this: (My monitor is over 1 meter wide) so here its looks not so bad as on my screen)


thanks, Alti

Yes, Yes ! thank you!

OK, thanks for this answer. i can not say which program counts here wrong.
so in Freilassing TS shows only 1 Km more then RWE2. 
In Destination Salzburg both programs conts zero.
it seems, that TS counts faster then RWE2.
but i have no Problem with that. its only a Game,

and RWE2 is my Game-Changer for TS into positive side.