RW Central

Hello @lokbattle, 

Are you using Train Simulator Classic with the latest update or an older version of Train Simulator ? 

Should be fixed in the next update (will be released next week).

Hello @Alti, 

Can you confirm me that RWE 2 is processing the passenger loading task normally even when this issue occurs ? 

Hello @Obelix, 

I have added a 'hide' button on this window. This is added in the next update of RW Enhancer 2 which should be released next week  

This should be useful for players who would like to take some screenshots by using the 'Pause' keyboard key.

La mise à jour 0.8.11.0 est maintenant disponible.

Cette mise à jour ajoute le support de la version "DirectX 12 Experimentale" de Train Simulator. Vous pouvez donc maintenant utiliser cette version DX12 lorsque vous lancez Train Simulator avec RW Enhancer 2. Vous pouvez activer l'utilisation de la version DX12 de Train Simulator dans le menu des paramètres :

Sachez que le moteur de rendu Vulkan sera automatiquement désactivé si vous activez ce paramètre.

A bientôt pour une prochaine mise à jour de RW Enhancer 2 et merci pour votre soutien continu ! 

CHANGELOG: 

Citer

- Added DX12 experimental Train Simulator version support (You can enable it in 'Train Simulator' settings menu section)
- Minor optimizations and fixes

Update 0.8.11.0 is now available.

This update add the support of the "DirectX 12 Experimental" version of Train Simulator. So now you can use this DX12 version when launching Train Simulator with RW Enhancer 2. You can enable the usage of the DX12 version of Train Simulator in the settings menu: 

Be aware that Vulkan renderer will be automatically disabled if you enable this setting.

See you soon for a next update for RW Enhancer 2 and thank you for your continued support ! 

CHANGELOG: 

Citer

- Added DX12 experimental Train Simulator version support (You can enable it in 'Train Simulator' settings menu section)
- Minor optimizations and fixes

Hello @Alti, 

No, steam startup parameters are not taken in account when you launch TS via RWE 2. But it would be nice to have some startup settings available in RWE 2 settings menu ! Will work on this soon  

The DX12 Experimental compatibility update is ready and currently being tested. Sorry for the little delay. This update will be released Tomorrow or on Tuesday.

Hello, a "hide" button is something I would like to add soon.  Will work on this after the next update that will add the DX12 experimental version support. 

Hello @Obelix, 

The same shaders are used on every routes, there can't be some specific shaders on some routes and some other on another route (this can't be changed as shaders can't be recompiled on the fly while the game is active, this is how the TS engine is designed). So yes if AP Sky pack 2.0 is installed you will loose some effects enhancement but only a few, most of effects enhancements will still be present anyway.

Hello @DecrepitTSfan, 

Yes the regular DX9 64 bits executable of Train Simulator is still compatible with the Vulkan Renderer just like before  

Bonjour @steph78, 

RWE 2 fonctionne bien avec le rendu vulkan dans la version normale en 64 bits de ST effectivement mais pas avec la version expérimentale DirectX 12  

Hello @Alti, 

So basically, TS won't run in fullscreen windowed mode or windowed mode and only in fullscreen for now ? This is something DTG will need to solve as the fullscreen is sometimes not properly handled by RWE 2 right now. 

The latest Train Simulator patch is not very "stable" for now and introduce some random issues. DTG said the most major issues will be fixed very soon. So hopefully everything will be "fine" again. 

I have done a complete check of changed files in the the last update and nothing used by RWE 2 has been broken. So if there is some new issues since the TS core update, it is likely that the problem is coming from TS and not RWE 2. 

One thing i have found is that the Serz.exe file has been updated and it is now a bit slower in terms of performances and this file is used by RWE 2 in the cooking process. So the cooking process is now a bit slower than usual. Hopefully I can find some way to speed this up in the futures if DTG is not fixing this performance issue. 

This is the main source of headache for me with RWE 2, it is 100% dependent of Train Simulator evolution. So sometimes if new issues are introduced by TS updates I need to find some workaround if possible or live with it...

You can be certain that i'm doing my best to make everything working in the best way possible on my side  

Hello, 

@Alti is right, RWE is calculating the "flyby" distance (like TSW) right now. The correct track distance is something that I would like to add in the future if I find the correct solution to do it. Right now I can't have access to the required data from TS to do it so i need to find a workaround. 

But the issue described by @theo223 is not related to this and it is a proper bug that can happen with some routes. Hopefully I can find a proper fix for this in the future.

Bonjour à tous, 

Comme vous l'avez peut-être remarqué, Dovetail Games a sorti une nouvelle version de Train Simulator qui a pour but d'améliorer la stabilité du jeu et d'apporter d'autres améliorations dans le futur. 

Je suis heureux d'annoncer que cette version est compatible (Aussi bien niveau fonctionnalités de gameplay que des améliorations des shaders) avec RW Enhancer sans qu'aucune mise à jour ne soit nécessaire du côté de RWE 2. 

MAIS 

La nouvelle version "DirectX 12 Experimental" (redémarrez steam si vous ne voyez pas encore cette option de lancement) n'est pas compatible avec le moteur de rendu Vulkan (DXVK) de RW Enhancer 2. Ainsi, si vous essayez de lancer la version DirectX 12 de Train Simulator avec le paramètre "Vulkan Renderer" activé dans RWE 2, vous obtiendrez un crash "Ordinal 2.0..." au lancement. Pour résoudre ce problème, il suffit de désactiver l'option "Vulkan Renderer" dans le menu des paramètres de RW Enhancer 2 et le crash disparaîtra   

Veuillez noter que Reshade (si vous l'utilisez) n'est également pas compatible avec cette version DX12. Mais les améliorations des shaders de RW Enhancer sont toujours compatibles

Lorsque vous jouez à lancer Train Simulator via le menu "Drive" de RW Enhancer 2, la version 64 bits normale sera lancée. Je prévois d'ajouter un paramètre afin d'utiliser la version DirectX12 dans un futur patch qui sortira la semaine prochaine. Vous pourrez ainsi choisir si vous voulez que RWE 2 lance la version normale ou la version DirectX 12. Merci de votre patience. J'ai besoin d'un peu de temps pour tester certaines choses de mon côté afin de m'assurer que tout fonctionne correctement. 

Après cela, je serai en mesure de reprendre mon travail régulier et d'ajouter plus de fonctionnalités à RW Enhancer 2 dans le futur. 

Merci à tous pour votre attention.
 

Hello everyone, 

As you may have noticed, Dovetail Games has released a new version of Train Simulator which target to improve the game stability and do more improvements in the future. 

I'm happy to say that this version is compatible with RW Enhancer 2 (gameplay features and enhanced shaders) without any update required on RWE 2 side. 

BUT 

The new "DirectX 12 Experimental" version (restart steam if you do not see this launch option yet) is not compatible with the Vulkan renderer (DXVK) of RW Enhancer 2. So if you try to launch DirectX 12 Train Simulator version with the "Vulkan Renderer" setting enabled in RWE 2 you will get a "Ordinal 2.0" crash at launch. To fix this issue just disable the "Vulkan Renderer" option in RW Enhancer 2 settings menu and the crash will be gone  

Please note that Reshade (if you are using it) is also not compatible with this DX12 version. But RW Enhancer shaders improvements are still compatible  

When you launch Train Simulator via RW Enhancer 2 drive menu, the regular 64 bits version will be launched. I'm planning to add a setting in order to use the DirectX12 version in a future patch that will be released next week so you will be able to choose if you want RWE 2 to launch the regular version of the DirectX 12 version. Thank you for your patience. I need a bit of time to wait test some things on my side to ensure that everything is working nicely. 

After this I will be able to resume my regular work and add more functionalities to RW Enhancer 2 in the future. 

Regards

Hello, 

Yes this issue is present in the base game and much more visible when using Vulkan/DXVK. It was fixed by RW Enhancer 2 some time ago but if you are using the AP Sky & Weather 2.0 the bug is back (since AP Sky & Weather 2.0 replace the shader that RW Enhancer 2 is fixing). So I can't do much about this.

Usually (90% of the time) this behavior is caused by anti-virus programs (windows defender or anything else), you can try to add both RWE 2 install directory and TS in the anti-virus exclusion list and it should perform better.

Hello @ighten, 

this is not possible as Train Simulator do not provide the way do do this  Unfortunately...

Hello, 

Have you tried a reset in the content cooker ? 

Hello @connorlrichey, 

Yes of course, all community downloads that you can find here on RW Central are compatible with the latest version of Train Simulator. Including TS Classic. 

La mise à jour 0.8.10.0 est maintenant disponible  

Cette mise à jour apporte des améliorations de réalisme aux systèmes PIS anglais (UK) à bord et dans les stations. Les annonces PIS sont désormais plus proches de la réalité lorsque l'on conduit au Royaume-Uni. Merci à la communauté anglaise qui nous a fait part de ses commentaires.

La prochaine étape consistera à ajouter le nom des compagnies ferroviaires dans les annonces. Cela se fera dans le futur. 

N'hésitez pas à nous faire part de vos commentaires sur les améliorations du PIS anglais. Le PIS allemand sera le prochain à recevoir des améliorations de réalisme. 

Comme toujours, cette mise à jour est également accompagnée d'améliorations et d'optimisations.

A bientôt pour une nouvelle mise à jour !  

CHANGELOG: 

Citer

- Added more realistic station PIS messages when driving in UK
- Added more realistic onboard PIS messages when driving in UK
- Increased station PIS security/safety/notice messages frequency
- Minor global PIS system improvements for future countries specialization
- Azure speech engine minor improvements and fixes
- Improved legacy shaders restoration process
- UI system improvements and fixes
- Network communication system improvements and fixes
- Core systems improvements and fixes

Update 0.8.10.0 is now available  

This update is adding realism improvements to the English (UK) onboard and station PIS systems. The PIS announcements are now closer to reality when driving in United Kingdom. Thanks to the English community that have provided much valuable feedback.

The next step will be to add train companies names support in the announcements. This will come in the future. 

Feel free to give your feedback on English PIS improvements. German PIS will be the next to receive realism improvements. 

As always this update also come with core improvements and optimizations.

See you soon for another update !  

CHANGELOG: 

Citer

- Added more realistic station PIS messages when driving in UK
- Added more realistic onboard PIS messages when driving in UK
- Increased station PIS security/safety/notice messages frequency
- Minor global PIS system improvements for future countries specialization
- Azure speech engine minor improvements and fixes
- Improved legacy shaders restoration process
- UI system improvements and fixes
- Network communication system improvements and fixes
- Core systems improvements and fixes

The issue is now fixed (some more tests will be made and you may encounter some small service interruptions in next hours but it should work most of the time) ! Sorry for the inconvenience and have a nice Sunday !  

Il y a 2 minutes , trainhunterHD a dit:

Same problem here. I think its related to latest update since i started having this issue right after the update

Not related to the latest update, the issue is on invision servers side so we are now waiting for the tech service of invision to fix the issue.